KSL1100X Box Furnace

Detailed Product Description

 

Product Description

• Chamber sizes: 438 cubic inches of heating area. ( 12" D x 8" W x 5H" or 7.2 Liter )
• Operation Temperature: 1100 ^oC ( 1200 ^oC Max for short time)
• Maximum energy efficiency is achieved by surrounding the chamber with thermal-efficient alumina fiber ceramic insulation
• Three sides resistance wire coil for fast and uniform heating ( click more picture to see)
• Heavy duty double layer structure with cooling fan. Lower temperature outside case
• 0.5" diameter observation window made of quartz glass allow user to see insider chamber during heating operation. ( Optional gas filling port can be added via the window -- see below picture)
• Also the window can be used as gas inlet by inserting a Alumina tube shown in the photo below.
• K type thermocouple installed for immediate use
• Temperature control unit can be separated from furnace , and make moving at easy
• PID automatic control via current limiting phase angle fired the resistor , e.g. power control with 30 segments programmable.
• Vent port installed on the top for gas flow. ( gas outlet)
• Gas inlet port is optional at $50 extra ( Please choose from product option)

Specifications

Chamber Cubic Capacity	438 cubic inch , 7.2 Liter
Chamber Dimensions D x W x H	11.8 x 7.9 x 4.7" (30 x 20 x 12 cm)
Volts	208 -240V  single phase 50/60 Hz
Watts	3500 W
Operating Temp Range	100-1100 oC ( 1200 oC Max for short time)
Stability at 1000 oC	+/- 0.5 oC
Uniformity at 1000 oC	+/- 2.0 oC
Temperature Control	PID automatic control via power control, e.g. current limiting phase angle fired the resistor with 30 steps programmable Please click here to learn why Built in over -temperature alarm and protection allows operation without attendant
Ramp up rate	Max. 50 oC/ min.
Shipping Weight	110 Lbs
Overall Dimensions D x H x W	25" x 21" x 27"
Warranty	One year limited
Items included	a built-in 30-segmnet temperature controller a K type thermocouple an observation window in the furnace door a pair of crucible clip a pair of protective gloves
Applications	Gravimetric analysis Sintering Quantitative analysis Heat treating Glass preparation

Optional: ---

You can add gas inlet port by order stainless steel tube kit in related product below -- click picture below to learn how

Stainless steel tube ( 5 mm dia ) with flange can be added as gas in-let port

Replace window by optional tube, you can have gas inlet port

Stainless steel tube shall remain inside refractory block

Gas out-let port