HPF-850HP split tube furnace

Detailed Product Description

Specifications:

Furnace casing		Double layer steel casing with air cooling. Built in thermostat to control Cooling  running automatically when case > 55oC
Power
	oC
	oC /min
		Stainless Steel (SS304 body / SS316 Cap, Made in USA) 2-1/2" O.D x 1-1/2" I.D. x 40"  Length Please click picture below to see detail drawing of pressure vessel
Constant  temperature	mm	150  (+/-1oC) ,   200  (+/-1oC)
		PID automatic control with 30 segments programmable LED digital display with protection Over temperature and thermal couple broken
	oC
Pressure Fitting		Two stainless steel  ( SS316)  flanges weld to tube with double high temperature silicone O-ring ( 300oC Max. ) Two Aluminum heat radiators are installed in front of flange to keep flange below 100oC Two high pressure valves are installed with flanges One Pressure meter installed to one of valve One pressure safety valve  (100 PSI)  is installed in one end of tube
		Warning:  Must limit Workign temperature under a certain pressure limited by vessel material strength  1800 PSI max    at 600 oC   (124 bar )  750 PSI max      at 650oC   (51 bar)  450 PSI max.      at 700oC   (31 bar)  150 PSI max.      at 800 oC   (10 bar ) Never use pressure vessel above 800oC
Warranty		one year limited on all electronic parts, not including quartz tube
Cautions		Please click to see our typical temperature profile calibration result at various temperature. From 7/15/08, MTI calibrate each each furnace by , and pre-set temperature off ( SC value ) in controller before shipping.